Presses, Dies, and Tools

Hornady Shell Holders are precision machined from solid steel then heat treated to perform flawlessly for the life of the press. Hornady steel shell holders also fit most other brands of reloading presses.

Lee 6.5 Creedmoor Case Length Gauge is a precise, easy way to trim to length and square the case mouth. Used with the Cutter and Lock Stud or Zip Trim.

 Lee #3 Priming Tool shell holder used in Lee hand priming tools. For the 32 Win Sp, 7.65x53 Argentine Mauser, 45 Win Mag and similar cases

Lee Liquid Alox is easy to apply. Eliminates leading and coats the entire bullet like a thin jacket for better accuracy.

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for...

The RCBS #28 Shell Holder is engineered for precision and durability, built from hardened steel to withstand years of use. Designed to ensure smooth alignment between the cartridge case and the reloading die, this shell holder is a must-have for any...

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for...

RCBS® Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head...

RCBS Single Stage shell holders are built from hardened steel and designed to properly align the case with the reloading die in single-stage and turret presses. They’re sized to fit specific case heads and capture 0.125 inch of the case head for...

This unit features an expander rod and ball and a decapping pin. It’s used with sizing dies to de-prime the case and expand the neck in bottleneck cartridges.

Not sure about the powder charge? Need to change bullets? The RCBS Standard Bullet Puller is designed to easily pull jacketed bullets without damaging them. It utilizes the standard 7/8-inch-14 thread and may be used in any single-stage reloading press...

This unit features an expander rod and ball and a decapping pin. It’s used with sizing dies to de-prime the case and expand the neck in bottleneck cartridges.