EASTON HALFOUT INSERT STEEL 5MM #2

$30.95

( 1 Review )

Current stock: 1

Easton’s 5MM Half-Out Insert is a convenient insert option compatible with any Easton 5mm arrow shaft (X size nock). Available in Aluminum or Stainless Steel configurations, this half-out delivers improved FOC versus conventional inserts

Refer to the following charts for the best fitting components for your setup. Steel Size 2

Aluminum Half-Out Specifications:

8-32 Thread
75 Grains
416 Stainless Steel
Packaged per dozen
Exposed length is 0.487″

5MM FMJ CHART

SIZE	GPI	SPINE	LENGTH	RPS POINT O.D. INCHES	B.A.R.	O.D. INCHES	HALF OUT SIZE
500	9.1	0.500	31	17/64	BAR 3 (5 GRAINS)	0.256	#1
400	10.2	0.400	31.5	17/64	BAR 3 (5 GRAINS)	0.263	#2
340	11.3	0.340	32	9/32	BAR 5 (5 GRAINS)	0.269	#2
300	12.0	0.300	32.5	9/32	BAR 5( 5 GRAINS)	0.273	#2
250	11.5	0.250	33	17/64	BAR 6 (5 GRAINS)	0.290	#2

5MM AXIS CHART

SIZE	GPI	SPINE	FULL LENGTH	RPS POINT O.D. INCHES	B.A.R.	O.D. INCHES	HALF OUT SIZE
700	6.1	0.700	31.5	17/64	BAR 3	0.245	#1
600	7.2	0.600	30.5	17/64	BAR 3	0.253	#1
500	8.1	0.500	31	17/64	BAR 3	0.256	#1
400	9.0	0.400	31.5	17/64	BAR 4	0.264	#2
340	9.5	0.340	32	9/32	BAR 5	0.267	#2
300	10.7	0.300	32.5	9/32	BAR 6	0.275	#2
260	11.5	0.260	34*	9/32	BAR 6	0.280	#2