ANNIHILATOR 125GR BROADHEAD 3PK
The Annihilator Broadhead is unlike anything else out there. Its single piece design flies quieter with increased accuracy delivering more damage all while penetrating deeper. The Annihilator was born out of a passion for the hunt. We believe you will have a hard time finding a broadhead you will be more satisfied with.
(3) ANNIHILATOR BROADHEADS
125 Grain Cutting Surface Area | .180 square inches (the largest cutting surface area of any other broadhead)
125 Grain Cut Diameter | .910 inches
4140 alloy steel hardened to Rockwell RC: 52 for superior edge retention and insane durability.
Can be easily field sharpened flat on a stone and reused.
Heads are batched within 0.2 grains of each other.
Designed and manufactured in the USA.
Lifetime warranty against manufacturing defect
A NEW SHAPE
We believe there is no greater satisfaction than harvesting an animal with a bow. The season is short and the time most of us get to spend hunting is even shorter. For years we dreamed of developing the most efficient and reliable broadhead ever produced. We wanted something that flew accurately, had improved lethality, and could be used OVER and OVER! We developed a truly unique broadhead, one you can confidently depend on.
We set out with a goal to create a broadhead that flies great with no tuning required. We eliminated all surfaces that cause broadheads to fly inconsistently. Our testing revealed that a one piece investment cast part held to the tightest tolerances in the industry with 100% symmetry would fly nearly identical to field points. Our unique back-scoop wedge design puts drag in just the right places for optimal flight stabilization with zero chance of mid-air failure. And it’s deadly quiet.
By adding surface area to the broadhead with the back-scoop wedge, you will see an increase in penetration compared to a standard fixed blade head. It’s the difference of an axe to a maul. As wet/viscous material comes into contact with the head’s surface, it is very quickly displaced away from the center mass of the arrow in equal proportion on all sides. Thus, creating a hole for the arrow shaft to travel through the animal with significantly reduced friction compared to any other broadhead / arrow combination.
The Annihilator creates actual holes in animals. The head on impact produces both high and low pressure in a magnitude never experienced with any other broadhead. The size and volume of animal matter displaced by this head prevents the wound from closing or clotting, translating to animals that expire faster while leaving more trace on the ground for recovery.
Unlike an assembled broadhead with moving parts, fasteners or cut outs, the Annihilator is investment cast out of one solid piece of 4140 Alloy, one of the toughest steels available. It is hardened to the perfect Rockwell for exceptional edge retention. It will not warp, bend, or break when passing through an animal, no matter the shot. And if you want to resharpen, just lay it flat on a sharpening stone, make a few passes and you’re ready to hunt. We stand behind our product with a lifetime guarantee against manufacturing defect.