hornady lnl classic kit and sonic cleaner combo
A single stage press is perfect for both beginners and those who want complete control over the entire process. The Lock-N-Load Classic delivers both dependability and precision with its uniquely angled, solid cast frame that offers greater visibility and easier access to the cartridge. Designed to assure perfect die and shell holder alignment, its Lock-N-Load quick change bushing system also makes the process quick and easy.
Sonic Cleaner Included.
Features an 80 watt ceramic heater that enhances cleaning action, which is especially helpful when cleaning gun parts. Its large 2 liter stainless steel tank holds up to three hundred 223 cases or one hundred fifty 308 cases.
Combined with One Shot® Sonic Clean™ Solution, its microjet action removes carbon residue and other debris from internal and external surfaces of cartridge cases, small gun parts and other small metal equipment. The cleaner's 5 to 30 minute timer allows you to choose the appropriate cycle for your application. Tank dimensions: 7.25" x 6" x 3" (2.1 qt.)
- Lock-N-Load® Classic™
- Reloading Handbook
- Lock-N-Load® Powder Measure
- Digital Scale
- Lock-N-Load® Die Bushings (3)
- Primer Catcher
- Positive Priming™ System
- Handheld Priming Tool
- Universal Reloading Block
- Chamfer & Deburr Tool
- Powder Trickler
- Powder Funnel
- One Shot® Case Lube
- Sonic Cleaner
LOCK-N-LOAD® QUICK CHANGE BUSHING SYSTEM
Lock-N-Load® bushings not only let you switch from one die to another in a matter of seconds, they also offer the quickest and easiest die setup on the market. Just set the die and tighten the Sure-Loc™ ring on to the Lock-N-Load® bushing. Quickly remove and re-install without the need to readjust the die or keep a separate seater die for each of your pet loads.
POWER-PAC LINKAGE AND SOLID STEEL ARMS
Arms rotate on steel pins that run completely through the cast frame. The Power-Pac linkage design multiplies the leverage you apply to the handle, making it easier to size cases and reduces user fatigue.
POSITIVE PRIMING SYSTEM™ (PPS)
Once the spent primer ejects at the top of the stroke, you can add a new primer to the PPS and it self-aligns to feed and insert the primer at the bottom of the stroke where leverage is best. Our self-aligning primer arm also allows for easy manual inserting of primers without having to raise the handle. All the work is done at the bottom of the stroke. Works easier than ram prime units and much better than old style primer arms. Small and large punch included.
STRONG ANGLED FRAME
This high strength alloy frame offers the rigidity and stability needed for precision reloading, and is guaranteed never to break or fail. The frame's unique angle gives the reloader greater visibility and easier access to the cartridge in the press.
EASY GRIP HANDLE
Large, ball-style grip reduces fatigue. The long handle increases leverage and reduces effort.